HIDEA manufacture constant voltage 12v 1.66a 18w led driver with 2 years warranty, approvaled by ETL CE ROSH. It is welcome in the North America market. It is can be compatible with any standard led strips light, such as HOMEDEPOT.
Specification
MODEL | SMT-012-018VW | SMT-024-018VW | |
OUTPUT | DC VOLTAGE | 12V | 24V |
RATED CURRENT | 1.66Amp | 0.83Amp | |
CURRENT RANGE | 0~1.50A | 0~0.75A | |
RATED POWER | 18W | 18W | |
RIPPLE&NOISE(max) | 150mV | 150mV | |
CURRENT TOLERANCE | ±0.5V | ±0.5V | |
SETUP RISE TIME | 80ms/110,220VAC | 81ms/110,220VAC | |
HOLD UP TIME(Typ.) | 60ms/110-220VAC | 60ms/110-220VAC | |
INPUT | VOLTAGE RANGE | 100~265VAC | |
FREQUENCY RANGE | 50~60Hz | ||
POWER FACTOR(Typ.) | |||
EFFICIENCY(Typ.) | >82% | >82% | |
AC CURRENT(Typ.) | 3.5A/110,220VAC | 2.0A/110,220VAC | |
INRUSH CURRENT (Typ.) | COLD START 50A/110~220VAC | ||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
Overload | overload protected@145-160% above peak rating | ||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
SAFETY&EMC | SAFETY STANDARDS | ETL/ROHS/CE Mark(EMC,LVD),IP67 | |
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
NOTE | 1.All parameters NOT specially mentoned are measured at 110V, 220VAC input,rated load and 25℃ of ambient temperature. | ||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||
[1mHIDEA ผลิตแรงดันคงที่ 12v 1.66a
ไดรเวอร์นำ 18wพร้อมรับประกัน 2 ปี รับรองโดย ETL CE ROSH ยินดีต้อนรับในตลาดอเมริกาเหนือ สามารถใช้งานร่วมกับไฟแถบ LED มาตรฐานเช่น HOMEDEPOTข้อมูลจำเพาะแบบอย่าง
SMT-012-018VW
SMT-024-018VWผลลัพธ์แรงดันไฟตรง 12V 24V จัดอันดับปัจจุบัน 1.66Amp 0.83Amp